How to Clean a Honda Outboard Carburetor

How to Clean a Honda Outboard Carburetor

Honda outboard carburetor

Your outboard engine relies on the right mix of fuel and air for proper outboard carburetor Carburetors are the traditional way for old-style outboards to achieve this; however, on newer engines, fuel injectors have replaced them as the standard method. Regardless of what type of outboard you have, it’s essential to drain and clean the carburetor every time you change the oil. This will help to prevent corrosion and other issues that can damage your engine.

First, you’ll need to remove the outboard carburetor This is usually done by loosening a small clamp on the top of the carburetor and lifting it off. You’ll also need to remove the throttle cable from the carburetor to get full access to it. It’s best to take the carb apart at this point so you can blow out all the tiny passages and jets. You can buy an inexpensive ultrasonic cleaner at a hardware store to make this job easier and faster.

Once you’ve removed the carburetor, you’ll need to open up the air intake ports by unscrewing the little screw that holds the filter in place. This will expose a larger hole on each side of the carburetor that you can blow out with some carb cleaner. Next, you’ll need to clean the carburetor float valve seat. The seats are brass fittings that the rubber tipped needle valves press into to fill the float bowls. If the seats are cruddy, the floats will overfill and leak past the little vinyl vent hoses into your engine.

If you’re still having trouble, you may need to replace your carburetor. Honda sells a kit that includes all the necessary parts to do this. You’ll need to know your engine type and model in order to find the correct parts. You can find this information in your owner’s manual or on the internet.

If you’re unsure how to replace your carburetor or don’t have the proper tools, ask a friend or a local boat shop for help. The mechanic should be able to replace your carburetor in a day or two. Then, you’ll be ready to use your honda outboard again. Be sure to drain the carburetor and engine before storing them for more than a few days. You should also use non-ethanol fuel and stabilize if you’re going to be storing your outboard for a long period of time. You should also consider adding an outboard carburetor drain to your list of boat accessories. This will help you avoid the costly repairs that can be caused by a clogged carburetor.

Tags:carburetor for tohatsu outboard motor 4 stroke mfs 15hp | outboard wire harness assy for yamaha outboard engine 40hp

Carburetor for tohatsu outboard motor 4 stroke mfs 15hpOutboard wire harness assy for yamaha outboard engine 40hp