Attach a 1:1 access hole mounting template (included with this manual) to the instrument panel, and position the mounting hole as standard with a hole cutter.
· Drill a 3.03 "(77MM) diameter hole and drill four 0.354 (9MM) diameter holes as shown on the mounting template.
·Route the arranged tubing through the middle 3.03"(77mm) diameter hole and connect it to the steering pump (1).
·Install the steering pump on the instrument panel with 4 washers (3) and 4 strain-relief nuts (4), 4 lock nuts (5), tightening torque≤15 N.
·Lubricate the taper section of the shaft. Install the semicircular key.Place the steering wheel in the direction shaft and the steering wheel
keyway on the semicircular key.Place the shim and tighten the steering lock nut. The tightening torque is ≤20 Newton.
 |
 |
|
|
Made of aluminum alloy and high-quality plastic. Anti-aging, corrosion-resistant. Anti-slip wave design delivers operation more comfortable operation. |
High-strength nylon hose with quick-fit 1/4pipe can fit for easy installation and multiplere-uses. |
The cylinder is equipped with a built-in two- way locking valve which eliminates rebound torque during torsion. |
 |
 |
|
| The state of the sealing system offers superior resistance to repeated compression sets and is designed to better withstand the harsh environment. |
With a shaft seal that you can easily replace, and the helm pump is a user friendly design. |
The hydraulic pump has a compact internal structure and a stylish exterior. Fits for boats rated to a maximum of 350 HP. |